SOP Title:
WT-
GERM KILLER™ 8910UVC BODYLight™ Operation
Effective Date:
10July2020
SOP Number:
WT-SOP-01007.05
Page:
10 of 17
Western Technology, Inc.
Confidential and Proprietary
11.5.3.2.2.
Note: The Right OFF Button is marked
and has the
open/disconnected power
mark “ ” molded into the
fluorescent orange Bumper above this button.
11.5.3.3. Turn ON the Charge Indicator LED located at the top of the front
face of the UVC BODYLight by depressing and releasing the Left
(
/ ) Button.
11.5.3.4. Note the color of the charge indicator LED:
11.5.3.4.1.
A
LED charge indicator light indicates a battery
having 2+ hours of battery charge.
11.5.3.4.2.
A
LED charge indicator light indicates
approximately 1 hour of battery charge remaining.
11.5.3.4.3.
A
LED charge indicator light indicates a depleted
battery requiring exchange.
11.5.3.5. Depressing and releasing the Left (
/ ) Button will not
cause any additional effect to the operation of the UVC
BODYLight, but the Light may be turned OFF by depressing and
releasing the Right (
/ ) Button.
11.5.3.6.
UVC Activation/Deactivation Code Mode (Special Order Only)
11.5.3.6.1.1. If the UVC BODYLight was provided with a UVC Lock-Out
Code, a UVC activation code must first be entered into the
system to unlock the UVC function.
11.5.3.6.1.2. To enter into the UVC Code Entry Mode, depress and
hold both the Left On (
/ ) and Right Off (
/ )
buttons simultaneously for about 2-seconds, at which time
the Battery Charge Indicator LED will initially flash
four times to indicate a change of mode, at which time the
LED will glow
for approximately 1-second, followed
by repeated
to
flashing, indicating that the
BODYLight has entered into the UVC Code Entry Mode.
11.5.3.6.1.3. Enter the code assigned to the UVC BODYLight to
activate the UVC mode, which consists of a series of
button depressions.
11.5.3.6.1.4. When the code is correctly entered and the UVC mode is
activated, the Battery Charge Indicator LED will flash
four times to indicate a correct code entry, after
which it will enter into the visible Glow COB illumination
mode.
11.5.3.6.1.5. If the code is incorrectly entered, the Battery Charge
Indicator LED will flash
four times to indicate an
