LEONARDO PRO X
User manual
EN
3
•
It is strongly recommended to connect the plant to the Internet for effective and timely maintenance and service if
the inverter malfunctions.
•
Install on a wall or solid structure, suitable to support the weight of the equipment.
•
Install in easily accessible and safe places.
•
Install possibly at human height for the display and status and connection LEDs to be easily viewed.
•
The installation of the equipment is carried out according to the plant and the place where the equipment is
installed; therefore, its performance is subordinate to the plant being installed correctly.
•
Authorised installation personnel must be specialised and experienced to perform this task; they must also have
received training and/or have demonstrated appropriate skills and knowledge of the unit's structure and operation
for Western CO equipment.
•
It is strictly forbidden to remove the lids/panels of the inverter as this invalidates the warranty.
Transport and storage
•
When storing or transporting the product, ensure that the mains power supply and battery cables are
disconnected.
•
Store the product in a dry environment; see the operating temperature range to avoid damaging the product.
•
Refer to the battery manufacturer's manual for information on transporting, storing, charging, recharging and
disposing of the battery.
•
Please remember that the packaging (cardboard, cellophane, staples, adhesive tape, straps, etc.) can cut and/or
injure if not handled with care. The packaging components must be disposed of in accordance with the regulations
in force in the country of installation.
•
When opening the packaging, check the integrity of the equipment and check that all components are present. If
defects or deteriorations are found, suspend operations and contact the carrier, and promptly inform Western CO.
•
In case of returns to the manufacturer, the material must be packed and protected properly. Western CO. reserves
the right to assess the condition of the product and warranty in case of damage due to improper packaging.
•
The information in the manual does not replace the safety regulations in force in the country of installation and the
rules dictated by common sense.
Operation
•
Check the correct environmental and logistic conditions also during operation
•
Western CO. reserves the right to operate remotely (if the inverter is connected to the internet), to make changes
or updates that improve the functions of the system without prior notice to the customer
Tolerance of readings
The data provided by the inverter may differ from readings taken by certified measuring instruments (e.g. production
meters, multimeters, grid analysers) because the inverter has wider tolerances on the readings taken since it is not a
measuring instrument.
In general, the tolerances are:
±5% for real-time readings with output power below 20%
±3% for real-time readings with output power above 20%
±4% for all statistical data.
