Lit. No. 13648/9511
5
January 1, 2002
950 lb.
371 lb.
3.9 ft.³
Sand = 95 lb./ft³
Salt = 40 lb./ft³
10 ft.³ 400 lb.
3.9 ft.³ 156 lb.
385 lb. Spreader
385 lb. Spreader
785 lb. Total Weight
541 lb. Total Weight
10 ft.³
385 lb. Spreader
1335 lb. Total Weight
385 lb. Spreader
756 lb. Total Weight
* Spreader weight includes Under Frame Mount.
Subtract 100 lb. if using an In-Bed Mount.
Weight*
Weight*
Weight*
Weight*
Salt = 40 lb./ft³
Very Coarse = 35 lb./ft.³
Coarse = 45 lb./ft.³
Fine = 50 lb./ft.³
LOADING
Certification
All new vehicle installations require NHTSA Altered
Certification Labeling. Installer to verify struck load of
snow or ice control material does not exceed vehicle
GVWR or GAWR ratings.
This manual covers vehicles which have been
recommended for carrying the spreader. Please see
your local dealer for proper vehicle applications.
Approximate Salt Weight
WARNING
Overloading could result in an accident or
damage. Do not exceed GVWR or GAWR
ratings as found in the driver-side cornerpost
of the vehicle.
Approximate Sand Weight
Load Weights
WARNING
The use of under-frame or in-bed mounts on
half-ton trucks is restricted to spreading only
salt or calcium chloride. (max. 50 lb. per cu.
ft.) Failure to comply could result in
exceeding the payload capacity.
NOTE: If spreader and ice control material loading
is in doubt, weigh vehicle for compliance with
vehicle ratings.
Summary of Contents for PRO-FLO
Page 2: ......
Page 4: ......
Page 25: ...Lit No 13648 9511 21 January 1 2002 ...
Page 26: ...January 1 2002 22 Lit No 13648 9511 ...
