Document: 1864en03.doc
WESTERSTRAND
Author: TAn
Date: 2012-01-18
Page: 13 of 15
WESTERSTRAND URFABRIK AB
P.O. Box 133
Tel. +46 506 48000
Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA
Fax. +46 506 48051
E-mail:
info@westerstrand.se
Setting alternating time, Loop time
Push [F] until display shows.
Push [P].
Display
shows
Alternating
time for display time is 4 seconds.
Push [P] for desired alternating time (0-25). Accept with [F].
Display shows
Alternating time for display temperature is 0
seconds.
Push [P] for desired alternating temperature (0-25). Accept with [F].
Push [R] for entering base mode or push [F] for next function.
Setting Correction value for the temperature sensors.
With this function the temperature sensors can be adjusted
±
9 ˚C.
Push [F] until display shows.
Push [P].
Display
shows
Push [P] for desired correction value (
±
9 ˚C). Accept with [F].
Push [R] for entering base mode or push [F] for next function.
LooP
L1 4
L2 0
Corr
C1 0
