14
Operation
Suggested Components for safe Operation
Air Pressure and Air Volume
Operate the air impact wrench with a pressure of 6.3 bar (90 psi) using a
compressor with an air suction capacity of at least 200 l/min. When using
higher pressure for operating the air tool than the max. allowable pressure of
7 bar, its self life will be reduced drastically. The ideal capacity is provided by
compressors with a suction capacity of 300 – 400 l/min.
Only use air hoses with an inner diameter of at least 9 mm. When setting up
the air pressure, always keep in mind that the pressure will decrease approx.
0.6 bar when using a 10 m long hose with an inner diameter of 9 mm.
Storing
After use put the air impact wrench and the accessory into the transport box
into the intended slots.
Store all parts of the set in a dust and dirt-free location, between 10°C and
30°C.
1.
2.
3.
4.
6.
7.
8.
9.
10.
1. Air Tool
2. Quick Coupling Adaptor
3. Pneumatic Pipe with Quick Couplers at both sides
4. Quick Coupling Adaptor
5. Quick Coupling
6. Valve
7. Oil-fog Lubricator
8. Pressure Regulator
9. Filter Unit
10. Air Source (Compressor)
5.
