6
Using
1. Mark the drilling holes with a spiky pen
on the wall. Make sure not to drill on
water pipes or live cables.
2. To mount the towel warmer on the wall,
use the 4 provided fixing holes and the
enclosed mounting parts or other
mounting parts that are suitable for the
resp. surface. Keep a safe distance of at
least 10 cm to other surfaces or
materials.
Operating
1. Connect the power plug with an earthed wall socket. Press the ON/OFF
switch in direction to
I
. The indicator light turns on and shows that the unit is
switched on.
2. Hang the towels on the hanging trails. With the
convenient hinge you can turn the towel warmer
up to 90° to the left or to the right.
3. After drying the towels, remove them and switch
off the unit by pressing the ON/OFF switch in
direction to
O
. Then, pull the power cord from the
wall socket.
min. 10 cm
min. 10
cm
