6
Operation
Before first Use
Take the sprayer out of the box and remove all packaging materials. Store
them in a safe place or dispose of them carefully; the plastic bags might
become deadly toys for small children.
Hint: According to factory-made functional tests, residual humidity can remain
in the unit. Residual humidity in a new article in not a fault.
Inserting the Batteries
1. Turn the battery cap (1) in direction “open“
and remove the cap.
2. Insert 4 batteries of the type 1.5 V, LR6
(AA), observing correct polarity. The +pole
and –poles are marked inside the compart-
ment.
3. Reattach the battery cap to the unit and
close the lid by turning in direction “close“.
Operation
Before first use, test the sprayer with clear water.
1. Unscrew the container (11) from the battery
compartment (3) and fill the desired liquid. The
max. filling capacity is 1 litre. Always be careful
while mixing, pouring and handling chemicals.
Make sure not to overfill the container. Make sure
the mixture is completely dissolved and there are
no dirt particles or clumps. If so, the filter (8) and
the absorbing tube (7) might become blocked.
2. Switch on the sprayer by pressing the “PRESS”
button (9). To switch on just press the button and
to switch off the unit release the button.
3. When spraying hold the unit by the handle (10).
