6
Using
Using as Water Sprayer
1. Insert the quick coupling (13) into the hand
grip (8) and connect the water hose to the
quick coupling. Open the water tap.
2. Press the trigger (10) to spray water.
3. To lock the trigger, tilt the bracket
backwards (see red circles). By doing this
the trigger will be engaged and you do not
need to depress
the trigger.
4. The correct position of the trigger is already
adjusted by factory with the handle adjusting screw (9) and does not need to
be readjusted.
Using the Gun with Detergent Bottle
1. Only fill max. 900 ml cleaning fluid into the detergent bottle.
2. Insert the suction pipe (11) into the mixing head (4) and
tighten the mixing head hand tight on the detergent bottle.
3. Insert the foam stick (1) up to the end into the mixing head
(4). Make sure the four pins on the foam stick fit with the
four notches in the mixing head. You can attach the foam
stick vertically or horizontally.
