7
Using
Position of
the Switch
Mixing
Ratio
1:10
1:20
1:30
1:40
1:100
1:300
4. Connect the already assembly mixing head into the hand grip (8) Push the
coupling (7) backwards and inset the mixing head into the hand grip, then
release the coupling.
5. Adjust the dosing of faom with the rotary switch.
In the position 0 the mixing ratio is 1:10,
in the position 1 the mixing ratio is 1:20 etc. The mixing
ratio can be set up to 1:300. With the right mixing ratio
the cleaning agent can be purposely diluted for achieving
enough foam for the cleanign application.
Hints
Attention! Do not use hot water! The temperature must be below 60°C.
Before appling foam on the sureface to be cleaning, moisten the surface with
plenty of clean water.
Do not apply cleaning agent directly on dry surfaces.
