Using
12
1. Fill the filling bottle (2) with clean,
new, brake fluid. Use only the kind of
brake fluid recommended by the
vehicle
manufacturer.
Then,
re-
tighten the filling bottle.
2. Close the lever (4) on the fill nozzle
(make sure the lever is positioned
horizontally).
3.
Remove the cap from the vehicle’s
master cylinder. Select the adapter
(1) which fits best on the brake fluid
fill hole in the master cylinder. Attach
the adapter to the fill nozzle (3).
4. Turn the filling bottle (2) upside down
and insert the tube into the brake
fluid fill hole of the master cylinder,
making sure the adapter (1) fits the
fluid fill hole securely.
5. Open the lever (4).
6. Screw the gun handle (7) firmly onto
the collecting bottle (5). Then, con-
nect the bleeding hose (6) to the
collecting bottle.
7. Clean the vehicle brake caliper with
brake parts cleaner (not included in
delivery).
8. Attach the bleeding hose (6) to the
bleeder screw on the vehicle caliper.
Then, connect the air compressor’s
air hose to the gun handle (7).
(1)
(4)
open
(3)
(4)
(2)
close
