Magnet/Stall Force
16
Magnet
Magnetic Limit Switch
Gearwheel
Each magnet should not be more than 20 mm away from the
magnetic limit switch (view from the side); otherwise proper function
cannot be guaranteed.
Adjusting the Stall Force
Due to special mounting situations it can, however, happen that the
adjusted stall force from factory is not sufficient, for reversing the
gate. In this case, the stall force setting has to be re-adjusted.
The potentiometer A is necessary to adjust the stall force of the
sliding gate opener. The potentiometer A is for the stall force when
opening the gate.
Turn the potentiometer
- clockwise for increasing the stall force and
- counter clockwise for decreasing the stall force.
mm
