15
Operating
Before first Use
Remove the polisher and all accessories for the packing. Keep
packaging materials out of the reach of children. There is a risk of
suffocation!
Polishing dust particles can be harmful to your health. Wear a
dust protection mask if necessary and protect your eyes with
safety goggles. Always wear ear protection while working with the
polisher.
Assembling the Handle and the Hook and Loop Disc
Disconnect the machine from power mains before commencing
any assembly work!
Mount the handgrip (1) on the polisher in order to can hold the
machine securely during work.
1. Attach the handgrip to the transmission housing and bolt the
handgrip down with the hex screws (3). Tighten the screw
with the Allen key.
2. For mounting the hook and loop disc (4) first press down the
spindle lock (2) to engage the spindle lock pin (6) and then
screw the hook and loop disc onto the pin by turning the disc
clockwise.
To disassemble the hook and loo disc, press down the spindle
lock and turn the disc with your hand until the pin engages.
Now turn the disc counter clockwise.
ON/OFF Switch
The ON/OFF switch (7) is located on the handle above the LC
display (8).
1. Insert the power plug into a grounded wall socket.
2. Now push the ON/OFF switch in direction
I
. The display
shows the value
00
. Press the speed controller
+Plus
(10)
and the polisher starts with the lowest speed of 1500 rpm.
Summary of Contents for 85 10 23
Page 3: ...III Übersicht Overview 1 2 2 6 10 9 8 7 3 5 4 ...
Page 23: ...Notizen Notes 19 ...
Page 24: ...Notizen Notes 20 ...