13
Operation
Tilting the Sanding Arm
Loosen the locking screw (4), tilt the
sanding arm as desires and
retighten the screw hand tight.
Hints on the safe Use of the Belt Sander
If possible, place the work pieces in a vice or secure them to a
workbench or other solid base.
When using the file on wood, it should be used in the direction of
the fibres whenever possible to avoid ripping fibres from the
wood.
If very wide work pieces are machined, it is advisable to align the
machine in such a way that it covers as much of the surface as
possible at the same time to achieve a smooth and level surface.
Before each use, make sure the sanding belt is free from
damage and can move freely. The edges of the belt should not
be frayed and the seam must be in good condition.
The unit should be clean and there should be no parts missing.
If you hear unusual sounds during operation or abnormal
vibration occurs, stop operating the unit and check the correct fit
of the sanding belt and the sanding arm. If the fault cannot be
remedied, have the belt sander checked by a professional.
Summary of Contents for 85 27 05
Page 3: ...III Übersicht Overview ...
Page 20: ...Notizen Notes 16 ...
