17
Operation
For Drilling
Set the mode switch (2) to the drill symbol.
For Hammer Drilling
Set the mode switch (2) to the hammer drill
symbol.
For Chiselling with loose Chisel
Set the mode switch (2) to the loose chisel
symbol.
For Chiselling with fixed Chisel
Set the mode switch (2) to the hammer symbol
Maintenance and Cleaning
Always keep the machine clean, dry and free from oil.
Use only a dry or slightly moist cloth for cleaning the housing.
Do not use abrasives or flammable substances such as
benzene, solvents, turpentine or similar.
Keep the ventilation louvers clean and free from obstructions
to prevent overheating the machine.
The carbon brushes may be replaced by a professional only.
If any sort of malfunction occurs, immediately stop using the
machine. Have the machine repaired by a professional or
contact the Westfalia customer support department. Do not
attempt to repair the machine yourself.
Summary of Contents for 88 18 86
Page 3: ...III Übersicht Overview 1 2 4 3 6 7 8 5 9 ...
Page 23: ...Notizen Notes 19 ...
Page 24: ...Notizen Notes 20 ...
