17
Operation
For Hammer Drilling
Set the drill selection switch (5) to the drill and hammer drill
symbol
and set the laver (8) to the hammer drill symbol
.
For Drilling
Set the drill selection switch (5) to the hammer drill symbol
and set the lever (8) to the drill symbol .
For Chiselling
Set the drill selection switch (5) to the hammer symbol and
set the lever (8) to the hammer drill symbol
.
For Setting the Position of the Chisel
Set the drill selection switch (5) to the hammer symbol with
the directional arrow
. The Position of the lever (8) is
irrelevant.
No function is linked to the combination drill selection
switch (5) to the hammer symbol and lever (8) to the
drill symbol ! Do not operate the machine in this
position, the machine may be damaged!
Maintenance and Cleaning
Always keep the machine clean, dry and free from oil.
Use only a dry or slightly moist cloth for cleaning the housing.
Do not use abrasives or flammable substances such as
benzene, solvents, turpentine or similar.
Keep the ventilation louvers clean and free from obstructions
to prevent overheating the machine.
If the hammer function deteriorates, suitable gear grease
should be added to the gear box. Open the gear box cover