8
Safety Notes
sion). Make sure not to damage cables or sup-
porting parts.
Do not lead the power cord around sharp
corners or over hot surfaces. Use cable glands if
necessary.
Tighten all screws after adjustment and frequent-
ly inspect the unit to make sure that it is securely
attached.
Do not expose the LED work light to oil, grease,
dust/dirt, extreme temperatures, strong vibra-
tions and mechanical stress.
Do not continue to use the unit if the unit is
damaged. Repair work must be done by a quali-
fied service technician.
To avoid danger of fire and personal injuries,
operate the work light only with the protective
cover in place and replace a broken cover im-
mediately.
The LED cannot be replaced.
Do not disassemble the unit or attempt to modify
or repair it yourself. It does not contain parts
serviceable by you. In case of questions or prob-
lems, turn to our customer service.
Do not direct the light beam towards people or
animals.
Do not use devices which can strongly focus
light for viewing the light beam.
