13
Operating
Before first Use
Remove the branch cutter and the accessory from the packaging. Keep
packaging materials out of reach of small children. There is risk of suffocation!
Charging the Battery
Charge the battery before first use.
The electronics protects the battery from over-charging, over-heating and total
discharge. There is no loss of charge. The battery is characterised by low self-
discharge. A fully charged battery is always ready for use, even if you do not use
it for months.
1. Insert the battery into the charging
base and connect the power cord of
the charger with a wall socket and
the charging socket. The battery fits
only in one position into the
charging base. The indicator light
(10) lights up red and indicates that
the battery is charged.
After charging the battery (for
approx. 3 – 5 hours) the charging
indicator light turns on green.
2. Remove the battery from the charging base and unplug the power cord from
the wall socket.
Operating
1. Insert the battery into the battery carrier. Do not apply force when inserting
the battery. Iserting can be achieveed easily and without resistance. Please
note, the battery fits only in one position into the machine.
