17
Operating
2. Remove the screw B and the screws C. Take out the plate. The blade set (1)
consists of the blade and a hook blade.
3. Replace the blade. Slide the blade into the rearmost position so the screw B
can be inserted into the guide opening and screwed into the thread. Screw
the branch cutter in opposite order together. Tighten the screws only hand
tight.
Maintenance and Cleaning
When cleaning or maintaining the branch cutter, first remove the battery from
the unit.
Oil the blade set after cleaning and before using the branch cutter again. The
branch cutter does not need further lubrication of maintenance.
Do not clean the housing with sharp detergents or aggressive chemicals in
order not to damage the surfaces. Use only a lightly moistened cloth for
cleaning.
Store the branch cutter in a dry, dust-free and frost-protected place.
