9
0800 328 5708
•
www.westhillbikes.com
3.5.2 Adjusting the Derailleur
Adjust the lower bolt to make the guide wheel move to the free-wheel; align the
•
centre of the guide wheel and the outer line of the smallest sprocket.
Turning the front chain-wheel, operate the gear lever to shift to the lowest gear,
•
then tighten the derailleur cable and fix it by the derailleur cable nut.
Turn the low adjustment screw so that the guide pulley moves to a position direct-
•
ly below the largest sprocket.
Tighten the adjust nut when the real gear is lower than the gear shift shows;
•
loosen the adjust nut when the rear gear is upper than the gear shift shows. It is
OK when the gear changes correctly and smoothly.
Outer line of smallest sprocket
Top adjustment
screw
Guide pulley
Low adjustment
screw
Largest sprocket
Guide pulley
Note: Be sure that the cable
is securely in the groove.
Groove
Summary of Contents for AEC-TDE16Z
Page 1: ...Electric Bike User Manual ...
