3
EN
7. Disconnect the power plug when the device is not in use, in case of
malfunctions, prior to attaching accessories and prior to each cleaning.
8. If the power cord or the casing of the device is damaged or if the device is
dropped, the device may not be used before it is examined by a professional
electrician.
9. A damaged power cord may only be replaced by the manufacturer or a
workshop commissioned by the manufacturer or by a similarly qualified person
in order to avoid hazards.
Installation location
1. Place the device on a flat, sturdy and heat-resistant surface.
2. Put the device in a place which is out of reach of children.
3. Do not operate this device near flammable materials (e.g. curtains, textiles,
walls) and never cover it. Ensure that there is always a sufficient safe distance
from flammable materials.
4. Use this device in dry indoor areas only and never outdoors.
5. Warning: Do not use this device near water or heavy moisture; e.g. in a damp
basement or beside a swimming pool or bathtub.
6. In order to reduce the risk of fire and electric shock, do not expose the device
to fire (fireplace, grill, candles, cigarettes and so on) or water (water drops,
water splashes, vases, tubs, ponds and so on).
7. Keep this device away from all heat sources like for example, ovens, hot plates
and other heat-producing devices/objects.
8. Protect this device from extreme heat (over 35°C / 95°F ) and cold (under 5°C
/ 41°F ) as well as from direct sunlight and dust.
SPECIFIC SAFETY INSTRUCTIONS
1. Do not blend hot liquids.
2. Neither the measuring beaker, nor the chopping bowl is microwave proof.
3. Short - time operating. Use the appliance to operate soft food for no longer
than 1 minute, and operate hard food for no longer than 15 seconds.
4. To reduce the risk of injury, never place cutting blade on base without first
putting bowl properly in place.
5. Be certain cover is securely locked in place before operating appliance.
6. The blades are very sharp! Handle carefully!
7. Avoid contacting moving parts.
8. Switch off the appliance and disconnected from supply before changing
accessories or approaching parts which move in use.
9. Clean the device and other accessories after each use. Refer to the chapter
CARE AND MAINTENANCE.
