9
To complete the cycle there are two possibilities to
choose from:
- Select the DRAIN program :
the water is emptied out without spinning.
- Select SPIN or DELICATE SPIN programs.
Select the spin speed by means of the relevant
button and then depress the
START
/PAUSE
button. The water is drained and garments spun
to the selected spin speed.
Attention!
Before selecting program DRAIN, SPIN or
DELICATE SPIN, the selector dial has to be
positioned on
OFF
.
7 SUPER RINSE button
This option can be selected with all programs, except
the wool program. The machine will add 2 rinses to
the selected program.
This option is recommended for people who are
allergic to detergents, and areas where the water is
very soft.
8 DELAY START button
The wash program can be delayed for 30min - 60min
- 90min, 2 hours and then by one hour up to a
maximum of 23 hours by pressing the DELAY
START button.
Selecting delay start
• Select the program and the required options.
• Select delay start.
• Depress
START
/PAUSE button: the machine starts
its hourly countdown.
The program starts once the selected delay start has
expired.
Cancelling delay start
• Depress
START/
PAUSE button .
• Depress the DELAY START button until the symbol
0’
is displayed.
• Depress the
START
/PAUSE button again to restart
the program.
Important
You can alter delay start at any moment, before you
press
START
/PAUSE button.
If you have already depressed the
START
/PAUSE
button, the delay start can be changed after selecting
the wash program again.
9 TIME SELECTING / REMAINING
(Display)
The display shows the following information:
Cancelling – Duration of the program – Delayed
start – Incorrect option selection – Alarm code –
End of program.
If a program has been cancelled (the program dial is
on
OFF
position, all the lights and the display will
turned off.
After selecting a program, the duration is displayed
in hours and minutes (for example
2.05
).
The duration is calculated automatically on the basis
of the maximum recommended load for each type of
fabric.
After the program has started, the time remaining is
updated every minute.
The selected delay (23 hours max) appears on the
display for 3 seconds, then the duration of the
previous program is displayed.
The count down is updated every hour.
Delayed start
2.05
Duration of the selected program
Cancelling
132990940.qxd 04/06/2004 08:40 Pagina 9 (Nero/Process Black pellicola)
