ISSUED: 04-16-04 SHEET #: 090-9101-1
4 of 5
Visit the Westinghouse Web Site at www.westinghousedigital.com
For customer service call
1-866-287-5555
.
Reattach screen onto bracket using the same
position determined in step 4. Wind helical wrap (
J
)
around all cords from back of LCD TV, as shown.
Place cord clips (
H
) as needed, to better manage
cords, making sure that one clip is close enough to
the hinge area to prevent cord from bunching up.
Note: Make sure that cords come out right side
of LCD assembly (A).
Place cord cover back onto LCD assembly (
A
), so
that it is even with the bends on the side of the
mount.
Note: Make sure all slack is pulled out with
mount fully open before replacing cord cover.
J
Right Side
A
Cord Cover
H
