15
The device may malfunction. Call the
customer service center for advice or
consult with a qualified agent.
The appliance emits an
unusual smell or smog.
(e.g. smoke, flame, or
burning)
Turn off the appliance and disconnect it
from power supply. Call the customer
service center immediately or contact with
a qualified agent.
The appliance releases
mineral smell during the
first-time operation.
It’s normal as catalytic oxidation is taking
place inside of the NCCO Reactor, the
smell is harmless to human body, and it
would disappear after a period of operating
time.
AOG Test Mode:
1) Turn off unit and long press the Control Button for 10 seconds to off 5
seconds later.
2) The unit cannot be turned off until the filter detector has detected all
filters have been properly installed.
Memory Function:
1) When the unit is running with battery power supply, if the unit detects
the battery power supply is low, the unit will be automatically power off
within 5 minutes after the unit has sent out the low battery indication.
When user replaces battery and turns on the unit again, the unit will
operate with the last operating mode before power off.
2) When the unit is operated with dedicated power supply or USB power
supply, the unit will be automatically power on and operate with the last
operating mode before power off.
3) The unit is equipped with the power-charging protection function:
when the power supply exceeds 5.6V, the unit will fail to charge.
4) The unit is equipped with the power-charging protection function:
when the power supply exceeds 5.6V, the unit will fail to charge.
Summary of Contents for NCCO 1804/SP6440
Page 25: ...25 ...
