5
/
7
2.
Position the iron on its rear heel.
3.
Select the temperature control dial to ‘MAX’.
4.
Plug the iron.
5.
Allow the iron to heat up until the indicator light first goes out.
6.
Unplug the iron from the electrical outlet.
7.
Keep the iron horizontally over the sink.
8.
Press down the ‘Self Clean’ button all the time. Boiling water and steam will now emit from the holes in
the soleplate.
9.
Move the iron forwards and backwards white this happens; go on letting steam and water escape until
the water tank is virtually empty.
10.
Release the ‘Self Clean’ button.
11.
Plug in the iron
12.
Set the temperature dial to the ‘MAX’ position, let the iron heat up again, the remainder of the water
inside the steam chamber will now vaporize and leave the iron through the soleplate.
During this process of dry steaming it is advised to use it over and old piece of cloth.
