25
TROUBLESHOOTING
There is no picture or sound.
▪
Make sure the AC adapter is connected.
▪
Verify that there is a valid source signal.
▪
Make sure the correct input mode is selected.
There is no picture from AV.
▪
Make sure the BRIGHTNESS is properly adjusted.
▪
The florescent lamp may have reached the end of its life.
Contact an authorized service center.
▪
Make sure the video source is plugged into the composite
video-in port.
There is no sound.
▪
Make sure the volume is not set to minimum.
▪
Make sure the sound is not muted
There is no picture or sound, just noise.
▪
The source signal may be weak.
▪
Your provider may be experiencing difficulties.
▪
Check your input connections.
Picture is not clear.
▪
The source signal may be weak.
▪
The provider may be experiencing difficulties.
▪
Check input connections.
