8. OPERATION
We recommend adjusting the chair angle before powering up the chair. This way, the body
measurements done automatically by the massage chair will be done correctly.
Back section up and down adjustments
Press this button
to lower the back and raise the leg and foot section.
Press this button
to lower the leg and foot section and raise the back.
Then, press on the power On/Off button
to start massage.
The WES41-700S will scan the
length of your back. Once done (about 10 seconds), the automatic massage mode will start. You can
choose another automatic massage mode. There are five automatic massage modes. You can interrupt
the automatic massage mode at any point by shutting off the unit. The massage chair will then
return to its original position.
If you prefer to use the manual massage mode, you can choose the type of massage you want (Shiatsu,
knead, tap, etc.). The massage chair will then use the massage mode you have chosen.
During a massage,
you can press on the power
button at any time. This will pause all
massage functions. The remote control will display a flashing light for 10 seconds. Press on the power
button again and the chair will go back to its original position and deactivate. massage
chair will come back to its original position and shut off.
Automatic massage modes
A.
Press on the ‘adjust
shoulder
’
buttons
or
to adjust the massage chair course length to
your preference.
B. Press one the Automatic massage mode button of your choice.
,
,
,
,
Memory mode
M1)
During an automatic massage, the first press of the on/off
button deactivates the
massage function and the remote control displays
“
memory
”
, you can choose any button of M1
M2 M3 buttons
to remember the massage and the position. You can
press the on/off
button again or wait for 10s, the position and massage function will
return to its original position.
