Westinghouse WGen12000DF, Service Manual

10 | Westinghouse Outdoor Power Equipment, LLC

COMPONENTS

CONTROL PANEL COMPONENTS

1. Push-Button START/STOP:

 Push once to 

automatically start the engine. Push again to stop 

the engine.

2. Battery Indicator: 

Indicates that power is ON. Light 

will remain illuminated while the unit is ON.

3. Battery Switch: 

Turns battery ON and OFF. Must be 

ON before electric or remote start.

4. Low  Idle: 

Low Idle minimizes fuel consumption, 

noise, and engine wear by lowering the engine RPM 

during intermittent use. See LOW IDLE section for 

important use considerations.  

5. Fuel Selector Switch: 

Used to select gas or propane 

operation.

6. USB Ports: 

Two-port 5V/2.1A USB outlet. Accepts 

Type A USB plugs.

7. Data  Center: 

Displays voltage, frequency, total 

hour meter, and run/maintenance timer.

8. Main  Circuit  Breaker

: The main circuit breaker 

controls total output of all outlets to protect the 

generator from overload or short circuit.

9. Smart Switch Outlet: 

Connects the Westinghouse 

ST Switch (sold separately) to the control panel.

10. Battery Charging Port

: Used to charge the battery 

with the included battery charger.

11. Ground  Terminal: 

The ground terminal is used to 

externally ground the generator.

12. 120/240-Volt AC, 50-Amp NEMA 14-50R 

Receptacle: 

Receptacle can supply either 120V 

or 240V up to 50 amps.

13. 30 Amp AC Circuit Breaker:

 Circuit breaker limits 

the current that can be delivered through the NEMA 

L14-30R receptacle to 30 amps.

14. 120/240-Volt  AC,  30-Amp  NEMA  L14-30R 

Receptacle: 

Receptacle can supply either 120V or 

240V up to 30 amps.

15. 30 Amp AC Circuit Breaker:

 Circuit breaker limits 

the current that can be delivered through the NEMA 

L5-30R receptacle to 30 amps.

16. 120-Volt AC, 30-Amp NEMA L5-30R Receptacle:

Receptacle can supply a maximum of 30 Amps.

17. 20  Amp  AC  Circuit  Breakers:

 Circuit breakers 

limits the current that can be delivered through 

each NEMA 5-20R receptacle to 20 Amps.

18. 120-Volt  AC,  20-Amp  NEMA  5-20R  GFCI 

Receptacles: 

Each receptacle is capable of 

carrying a maximum of 20 amps on a single 

receptacle or a combination of both receptacles.