10 | Westinghouse Outdoor Power Equipment, LLC
COMPONENTS
COMPONENTS
CONTROL PANEL COMPONENTS
5
4
2
1
3
77
6
78
10
9
11
12
1. Fuel Selector Switch:
Used to select gas or propane
operation.
2. Push-Button START/STOP:
Push once to
automatically start the engine. Push again to stop
the engine.
3. Battery Switch:
Turns battery ON and OFF. Must be
ON before electric or remote start.
4. Battery Indicator:
Indicates that power is ON. Light
will remain illuminated while the unit is ON.
5. 30 Amp AC Circuit Breaker:
Circuit breaker limits
the current that can be delivered through the NEMA
L5-30R and TT-30R receptacles to 30 Amps.
6. 120 Volt AC, 20 Amp Duplex NEMA 5-20R
Receptacles:
Receptacles can supply a maximum of
20 Amps.
7. 20 Amp AC Circuit Breaker:
Circuit breaker limits
the current that can be delivered through the NEMA
5-20R receptacles to 20 Amps.
8. 30 Amp AC Circuit Breaker:
Circuit breaker limits
the current that can be delivered through the NEMA
L5-30R and TT-30R receptacles to 30 Amps.
9. 120 Volt AC, 30 Amp NEMA TT-30R Receptacle:
Receptacle can supply a maximum of 30 Amps.
10. Battery Charging Port
: Used to charge the battery
with the included battery charger.
11. Ground Terminal:
The ground terminal is used to
externally ground the generator.
12. CO Sensor indicator lights:
The CO Sensor
monitors for the accumulation of poisonous carbon
monoxide gas. If increasing levels of CO gas are
detected, the CO Sensor automatically shuts down
the engine.
