8 | Westinghouse Outdoor Power Equipment, LLC
COMPONENTS
COMPONENTS
CONTROL PANEL COMPONENTS
2
1
3
8
6
77
9
10
5
4
1. Run/Stop Switch:
Push to Run position to start or
Stop position to shut the generator off.
2. Data Center:
Toggle to show voltage, frequency,
total hour meter, and run/maintenance timer.
3. Voltage Selector Switch:
Select 120 Volts or 240
Volts.
Shut the generator
OFF
before switching
voltages.
4. 120/240 Volt AC, 30 Amp NEMA L14-30R Twist
Lock Receptacle:
Receptacle can supply either
120V or 240V output.
5. 120 Volt AC, 30 Amp NEMA TT-30R Receptacle:
Receptacle can supply a maximum of 30 Amps.
6. 120 Volt AC, 20 Amp Duplex NEMA 5-20R
Receptacles:
Receptacles can supply a maximum of
20 Amps.
7. 20 Amp AC Circuit Breaker:
Circuit breaker limits
the current that can be delivered through the NEMA
5-20R receptacles to 20 Amps.
8. 30 Amp AC Circuit Breaker:
Circuit breaker limits
the current that can be delivered through the TT-
30R receptacle to 30 Amps.
9. 22-Amp Circuit Breakers:
Each circuit breaker
limits the current that can be delivered through
each 120 Volt leg on L14-30R to 22 Amps.
10. Ground Terminal:
The ground terminal is used to
externally ground the generator.
DATA CENTER
Run Time/Maintenance:
Displays current run time.
Resets to zero when shut
down. Maintenance
reminder displayed
when required.
Frequency (Hz):
Displays power output
frequency in Hertz.
Voltage:
Displays current voltage
output.
Lifetime Hours:
Displays the lifetime run
hours.
Mode Button
Push the Mode button to cycle through
the data display modes.
