© 2017 RVM Australia Pty Ltd. All Rights Reserved
7
TROUBLESHOOTING
BEFORE CALLING FOR SERVICE
If the vacuum sealer fails to operate:
1.
Check to make sure the vacuum sealer is plugged in correctly and securely. If it
is not, remove the plug from outlet, wait 10 seconds and plug back in securely.
2.
Check for a blown or tripped circuit breaker in your home. If these seem to be
working correctly, test another appliance in the same outlet to ensure the outlet
is working correctly.
IF NONE OF THE ABOVE SOLVES THE PROBLEM, PLEASE CONTACT A QUALIFIED
TECHNICIAN, DO N
YOURSELF.
OT TRY TO ADJUST OR REPAIR THE VACUUM SEALER
CUSTOMER SERVICE
In the event you believe your appliance to be defective, please return it along with
your sales receipt to the place of purchase for resolution.
For any enquiries, please call our service center on:
Tel: 1300 883 109 - Mon-Fri 8:00am – 5:00pm WST
TROUBLESHOOTING
T
not operate correctly, it may be defective.
roubleshoot your problem by using the chart below. If the vacuum sealer still does
Appliance does not
turn on.
TROUBLE
Appliance is not
plugged in.
POSSIBLE CAUSE
Check that appliance is
plugged into a working
power outlet
POSSIBLE REMEDY
Air is still in the bag
after vacuum.
Leak in bag but
not from sealed area.
Seal bag with air, then
immerse in water. Bubbles
indicate a leak, use a new
bag if bubbles appear.
Air was removed but
after a period of time,
has re-entered.
Fermentation or the
release of natural
gases from inside the
foods may have
occurred.
Food may have begun
to spoil and should be
discarded.
