Westinghouse WWF1044M7WA, User Manual

14

        www.westinghouse.co.nz

14         www.electrolux.co.th 

Prewash (     ) Touchpad

Select this option if you wish your laundry 

to be pre-washed before the main wash. 

Use this option for heavy soil. The 

indicator of this option will be on.

Select this option to add approximately 

30 minutes of tumbling in vapour after 

the rinse cycle. The indicator of this 

option will be on.

Plus Hygiene Touchpad

Vapour may not necessarily be visible 

inside the drum during a vapour cycle. 

Vapour is created below the drum and 

allowed to naturally rise into the 

clothes.

At the end of the Vapour cycle, the 

clothes will be warmer, softer and 

detached from the drum.

If Vapour option is selected, rinse 

temperatures will be elevated.
During a vapour cycle, you may notice 

vapour exiting from the drain hose of 

the washing machine, this is normal 

and there is no cause for alarm.

Vapour may not be present during the 

entire vapour cycle.
Vapour function is more effective with 

half load.

NOTE

When you set this function, put the 

detergent into the “       ” compartment. 
This function increases the program 

duration.

●

●

●

●

Easy Iron Touchpad

When selecting this option the laundry is 

gently washed and spun to avoid 

creasing. In this way ironing is easier.
The indicator of this option comes on.

Extra Rinse Touchpad

This option is recommended for people 

who are allergic to detergents, and in 

areas where the water is very soft. 
Press this touchpad to add two rinse 

phases to a program. The indicator of 

this option will be on.

15

ENGLISH

Save Favourite (     ) Program

3.5 Settings

Program settings that are frequently used 

can be saved (e.g. Cotton, 60°C, 1200 

rpm, with Prewash and Hygienic Care). 

To recall the favourite wash program, 

turn selector knob to “Favourite     ” 

program. You will get acknowledgement 

on the display when the Favourite 

program is loaded. 

To program/re-program Favourite with 

your own selections and save them, 

proceed as follows:
1. Put machine in Stand-By mode.
2. Select your desired wash settings.
3. To save favourite program, press and 

hold “Plus Hygiene” touchpad about 2 

seconds and you will hear “Bip, Bip” 

sound and “           ” is flashing on the 

display.

This setting permits you to either enable

or disable the buzzer at the end of the 

program. As an example, you might wish 

to disable this buzzer when you start a 

wash when going to bed, so that when 

the wash finished approximately 1 hour 

later, it will not disturb you through the 

night.

Error warning beeps such as critical 

faults are not disabled.

Enabling/Disabling End-Of-Wash 

Buzzer

To disable the buzzer sound, press 

“Spin and Plus Hygiene” touchpads at 

the same time about 3 seconds, the 

icon “          ” will show on display 

along with buzzer sound.
To return to default configuration press 

these 2 touchpads at the same time 

about 3 seconds, the icon “          ” will 

show on display along with buzzer 

sound.

●

●

Child Safety Lock (     ) Option

Your appliance is provided with CHILD 

SAFETY LOCK which permits you to leave 

the appliance unsupervised with the door 

closed without having to worry that children 

might be injured by or cause damage to 

the appliance.

Set this option after pressing the 

Start/Pause touchpad.

To activate the function, press and 

hold “Prewash” touchpad about 

2 seconds until the display shows the 

icon “           ”.

To set “Child Lock” option:

To deactivate the function, press and 

hold “Prewash” touchpad about 

2 seconds until the display shows the 

icon “          ”.

This function remains enabled 

even after the appliance is 

switched off.

The touchpads are locked 

(except for the On/Off button).

●

●

If you press any touchpad while 

Child Lock is activated, the icon 

“           ” will flash on display 

3 times  along with buzzer sound.