Westinghouse WWF1274, User Manual

16      

To pause press Start/Pause. 
The indicator will start flashing.
Press the Start/Pause again. 
The program will continue.

Changing a running program is 
possible only by switching off the 
appliance.

Press the “On/Off” button to 
cancel the program and to turn 
off the appliance.

5.2 Interruption Of A Program

5.3 Changing A Program

Once the wash program has 
started, only some of the options 
can be changed. Machine will 
display “       ” if selected option 
is not available.
Press Start/Pause to pause. The 
indicator will start flashing.

1.

Change the options.

2.

Press Start/Pause again. The 
program will continue.

3.

While a program or the Delay End 
is operating, the appliance door is 
locked and the door lock indicator 
“       ” is on. 
First set the machine to PAUSE by 
pressing the “Start/Pause” 
touchpad. Wait until the door lock 
indicator “       ” goes off, then the 
door can be opened.

If the door lock indicator “      ” 
does not disappear,

 this means 

that the machine is already 
heating and the water level is 
above the bottom edge of the 
door or the drum is turning

. In 

this case the door CAN NOT be 
opened. If you need to open it, you 
must drain the water to open the 
door.
To drain the water, you have to 
switch the machine off by pressing 
the “On/Off” button to deactivate 
the appliance. Turn On the 
machine and select “Drain & Spin” 
option, then press Start/Pause 
touchpad to start the program.  

When the program is completed 
and the door lock indicator “       ” 
goes off, you can open the door.

Press the “On/Off” button again 
to start the appliance. Now, you 
can set a new washing 
program.

The appliance will not drain the 
water.

5.4 Changing The Options

5.5 Opening The Door

You can select “

No Spin

”, if 

you want the machine to 
only drain the water. 

When The Washing Program 
Is Completed, But There Is 
Water In The Drum 
(Option “Rinse Hold” is used)

The drum turns regularly to 
prevent the creases in the 
laundry.

You must drain the water to open 
the door.

The door lock indicator “      ” is 
on. The door stays locked.

5.6

The indicator “Start/Pause” 
flashes to remind you to drain 
the water.

1.

To drain the water:

Press the “Start/Pause     ” 
touchpad. The appliance drains 
the water and spins with the 
maximum spin speed for 
selected program.