Westinghouse WWF7025EQWA, User Manual

        11

Select this option to add approximately 

30 minutes of tumbling in vapour during 

the wash cycle. Vapour helps open fabric 

fibers up to allow laundry additives to 

release tough stains. The indicator of this 

option will be on.

Vapour      Touchpad

Vapour may not necessarily be visible 

inside the drum during a vapour wash 

cycle. Vapour is created below the 

drum and allowed to naturally rise into 

the clothes.

At the end of the Vapour cycle, the 

clothes will be warmer, softer and 

detached from the drum.

If Vapour option is selected, rinse 

temperatures will be elevated.

During a vapour cycle, you may 

notice vapour exiting from the drain 

hose of the washing machine, this 

is normal and there is no cause for 

alarm.

Vapour may not be present during the 

entire vapour wash cycle.
Vapour function is more effective with 

half load.

NOTE:

●

●

●

●

With this option you can decrease the 

program duration. Use this option for 

items with light soil or items to refresh.

Quick

This option will reduce the working 

time and the number of rinses.
If you need to add more rinse 

phases, press “Spin” + “Option” at 

the same time to add “Extra Rinse    

    ” option.

This option allows you to soak heavily 

soiled clothes and stained items at the 

beginning of the wash before main 

washing phase.
This option will increase the duration of the 

program selected for about 50 minutes. 

And uses more water from normal wash. 

The process is as follows.

Soak

Fills with water while rotating the drum 

to slowly dissolve the detegent. (this 

takes about 20 minutes)

If you do not wish to use the soak water to 

wash clothes, please follow the steps 

below:

NOTE

During Soak phase, 

drum will rotate 

occasionally to 

redistribute the clothes.

Press Start/Pause to pause the  

machine. Then press On/Off to turn off 

the machine.

1.

Press On/Off again to start the 

machine, add detergent, and select a 

program. Press Start/Pause to start the 

selected program. 

2.

1.

Soak (this takes about 30 minutes)

2.

Once Soak phase is completed 

machine may add more water if 

required then proceeds to main Wash.

3.