Westinghouse WWF7025EQWA, User Manual

       17

The appliance stops automatically.
The acoustic signal will operate.
The display will show “        ”.
The indicator of the touchpad 

Start/Pause goes off.

-
-
-
-

-
-

The door lock indicator “       ” goes off.
Remove the laundry from the 

appliance. Make sure that the drum is 

empty.

5.9

 At The End Of The Program

If you want to decrease washing time, 

press the “Quick” option touchpad. 

See page 11.
If you want to define the end of the 

washing cycle, press the “Delay End 

(    )” touchpad repeatedly to choose 

your washing machine working time.

To pause, press Start/ Pause. The 

indicator will start flashing.

-

Press the Start/Pause again. 

The program will continue.

-

Changing a running program is possible 

only by switching off the appliance.

Press the “On/Off” button to cancel 

the program and to turn off the 

appliance.

-

5.5

 Interruption Of A Program

5.6

 Changing A Program

It is possible to change only some option 

after the program has started.

Press the “On/Off” button again to 

start the appliance. Now, you can set 

a new washing program.

The appliance will not drain 

the water.

-

5.7

 Changing The Options

Press the touchpad Start/Pause. The 

indicator will start flashing.

1.

If available change the options that 

you wish.

2.

Press Start/Pause again. The program 

will continue.

3.

2.

If an option is not compatible with the 

wash program selected, symbol “      ” 

will flash on display along with buzzer 

sound.

-

The appliance will automatically 

adjust the selected program 

duration according to the type 

and size of the load.

The display will show adjusted 

program duration.

To start a program, press the Start/Pause 

touchpad. The corresponding pilot light 

will stop flashing and a default program 

duration will be displayed on the screen.

5.4

 Starting A Cycle (     )

After approx. 15 minutes from 

the start of a program:

If you press any touchpad while a 

program is operating, symbol “        ” will 

flash on display along with buzzer sound. 

(except Start/Pause touchpad) 

While a program or the Delay End is 

operating, the appliance door is locked 

and the door lock indicator “       ” is on. 

First set the machine to PAUSE by 

pressing the “Start/Pause” touchpad. 

Wait until the door lock indicator “       ” 

goes off, then the door can be opened.
If the door lock indicator “       ” does not 

disappear, this means that the machine 

is already heating and the water level is 

above the bottom edge of the door or the 

drum is turning. In this case the door 

CAN NOT be opened. If you need to 

open it, you must drain the water to open 

the door.

In case of emergency please 

refer to “Emergency door 

opening” on page 28.

5.8

 Opening The Door

To drain the water, you have to switch 

the machine off by pressing the “On/Off” 

button to deactivate the appliance. Turn 

On the machine and select “Drain & Spin” 

option, 

you can select “No Spin”, if you 

want the machine to only drain the 

water

 then press Start/Pause touchpad 

to start the program.