Westinghouse WWF7025EQWA, User Manual

20         

Mould stains

: treat with bleach, rinse 

well (whites and fast coloureds only).

Grass

: soap lightly and treat with bleach 

(whites and fast coloureds only).

Ball point pen and glue

: moisten with 

acetone (*), lay the garment on a soft 

cloth and dab the stain.

Lipstick

: moisten with acetone (*) as 

above, then treat stains with methylated 

spirits. Remove any residual marks from 

white fabrics with bleach.

Red wine

: soak in water and detergent, 

rinse and treat with acetic or citric acid, 

then rinse. Treat any residual marks with 

bleach.

Ink

: depending on the type of ink, 

moisten the fabric first with acetone (*), 

then with acetic acid; treat any residual 

marks on white fabrics with bleach and 

then rinse thoroughly.

Tar stains

: first treat with stain remover, 

methylated spirits or benzine, then rub 

with detergent paste. 
(*) do not use acetone on artificial silk.

Low sudsing detergent is required for this 

washing machine to prevent oversudsing 

problems, unsatisfied washing result and 

harm to the machine. Low sudsing 

detergents designed for front load 

washing machines are labelled “Front 

Loading”, “high efficiency”, “HE”, such as 

Cold Power for Front Loaders or “Matic”.

6.6 

Detergents Type And 

Quantity Of Detergent

Do not use wrong types of detergent, 

such as Top Loading, Handwash 

detergent or Soap-Based products in 

your frontload washing machine. This 

can result in excessive suds, longer 

cycle time, low spin speeds, poor 

rinsing and overloading of the motor.

The choice and quantity of detergent will 

depend on ;

type of fabric (delicates, woollens, 

cottons, etc.) ;

degree of soil ;

size of the load ;

wash temperature ; and
hardness of the water used.

the colour of clothes ;

Information on hardness of the water in 

your area can be obtained from the 

relevant water supply company, or from 

your local authority.
You may have to try using the detergent 

quantity as per manufacturers’ 

instructions then compare the wash result 

to the list below and adjust the amount of 

detergent for your future washes 

accordingly.

Water hardness is classified by so-called 

“degrees” of hardness.

The choice of detergent and use of correct 

quantities not only affects your wash 

performance, but also helps to avoid waste 

and protect the environment. Although 

biodegradable, detergents contain 

substances which in large quantities can 

upset the delicate balance of nature.

Quantity of detergent to be used

the washload to turn grey,

greasy clothes.

sudsing,

inadequate rinsing.

reduced washing effect,

Not enough washing powder causes:

Too much washing powder causes:

you are washing a small load,

large amounts of foam during washing.

the laundry is lightly soiled,

Use less detergent if: