3.6
DISPLAY
The display shows the following information:
14
ENABLING/DISABLING END OF
WASH BEEP
User can also disable the buzzer by pressing
the [Water Level] [Spin] button
down for 3 sec and release.
The volume level is set in the factory and
cannot be adjusted by the user.
MACHINE IN PAUSE MODE
User needs to touch [Start / Pause] button
once to pause the appliance.
Under the remaining time is show text <PAUSE>
3.7
START/PAUSE BUTTON
TO START THE WASH CYCLE /
PROGRAM
WASH CYCLE IN PROGRESS
END OF PROGRAM
WWT1020A
WWT8040
WWT1020A
WWT8040
WWT1020A
WWT8040
After selecting a program, the duration is
displayed in hours and minutes
(for example 2:34 which means 2 hour
and 34 minutes)
The duration is calculated automatically on the
basis of the maximum recommended load
for each type of fabric.
After the program has started, the time
remaining is updated every minute.
When the wash program is completed,
the display shows text <FINISHED> or
<END> .
The Start/Pause button LED will
turn Off.
The Start/Pause button LED will always light
(not blink) to indicate that now machine is in
executing mode.
LID LOCK FEATURE
This is a safety feature so as to prevent
anyone from opening the door lid when
(Except WWT8040)
the drum is spinning.
To unlock the lid, user needs to tap
[Start / Pause] button once to pause the
appliance and the display will turn Off the lid
lock icon.
The mechanical lock unlocks when the
The Lid Lock indicator will light up when
the feature activate
drum stops spinning.
Press the Start/Pause button to Pause.
Start/Pause to Pause is used to Start,
Stop and Continue the wash.
If you have started your wash and you
wish to stop it for some reason, press the
Start/PauseTo Pause touchpad and
hold it for
1.2 secounds
to enter
pause mode.
The Start/Pause button LED will blink.
Start/Pause LED
Start/Pause LED
it will disable power on sound also.
Summary of Contents for WWT1020A
Page 1: ...Model WWT8040 Washing Machine WWT1020A...
Page 34: ...NOTE 34...
Page 35: ...35...
Page 36: ...G0013481 004 119730437...
