Westinghouse WWT1020A, Manual

The out of balance has 2 level which are low 
level and high level.

The high level: Machine will be stopped, 
caused by an uneven distribution of clothes in 
the wash bowl. To rectify the out of balance 
condition, open the lid and redistribute the 
clothes evenly in the wash bowl. Closing the 
spin stage of the wash.

The low level: The washing machine try to 
optimize by reduce spin speed to avoid out of 
balance to finish the cycle.

If you have frequent out of balance
interruptions, it may be due to your
washing machine not standing firm and level
on the floor. This can be corrected by adjust
the washing machine legs as described
in the Installation Instructions supplied with
your machines.

7

ABOUT YOUR WASHING MACHINE

Out of Balance Interruption

Watch the lights on the control panel to see 
the effect pressing a touchpad or turning a 
program selector knob has, and listen for 
“BEEPS”.

When you press a touchpad you will get a 
short “BEEP” to acknowledge the entry. 
If the option is not available at the time, the 
machine will not allow you to select it. After 
the machine has started, the entire wash 
option touchpad will be disabled and machine 
will give three short beeps to indicate the
touchpad is disabled. The Star/Pause To 
Pause touchpad is still active but you need 
to 

press and hold the touchpad for 

minimum 1.2 seconds to pause machine. 

This is to confirm that you really want to pause 
the machine.

NOTE:

  All functions of the washing machine 
  will stop when the lid is open.

         ActiveMix

This product features the new ActiveMix 
Wash System that uses less amount of water, 
and is more energy efficient,during the washing 
process. It achieves this with just the right 
amount of water needed, and by a detergent 
pre-mixing system that minimizes detergent 
residue even during cold wash to give you a 
cleaner wash result.

Water at 35  C is combined with detergent
to dissolve and activate it. Depending on 
model, this concentrated solution is then
circulated or showered over the clothes in
combination with unique bowl and agitator
rotations to provide wash action at the selected
wash temperature.

After the wash operation is completed, the
bowl is filled with more water. The low profile
agitator or agitator then moves in an energy
efficient mode, generating additional 
mechanical actions.

(WWT1020A)

(Only for WWT1020A)

Your washing machine has selectable 
“Auto” sensing water level option as well 
as allowing you to choose a manual 
water level if you wish. We recommend 
you to use the Auto water level option to 
ensure there is just the right amount of 
water for the wash load in the machine.
In other words, it will usually give you the 
best wash while also being the most
efficient in terms of water usage.    

Auto Water Level Feature

Wash Operation

Agitation

water spraying

pump on

drain hose

Touchpad Response and Lights 

Always press touchpads gently.

o