background image

        

15

Delay End Touchpad

Before you start the program, this option 

makes it possible to define the end of the 

washing program from minimum of 1 hour 

to maximum of 20 hours.

After selecting Delay End time, press 

Start/Pause touchpad to start the 

program. Machine will then countdown 

and update time on the display every 

hour until it reaches the starting point of 

the wash cycle.

Press the Delay End touchpad to choose 

the end time as you wish. The display 

shows the number of hours. 

For example, if the program duration of 

your selected program is 3.20 hours and 

you define the “Delay End” time to 6 

hours. This means your wash program 

will finish in 6 hours. (See diagram)

3.20 hrs.

2.40 hrs.

Program Cycle

 : 6 hrs.

Pressed 

Start/Pause

End of 

Cycle

Start the 

Program

Countdown

This option must be selected after 

choosing the wash program, and 

before pressing the “Start/Pause” 

touchpad. 

If you wish to modify or cancel Delay End 

option after starting the program, follow 

the steps below:

set the washing machine to PAUSE by 

pressing “Start/Pause” touchpad;

-

deselect this option by pressing

“Delay End” touchpad repeatedly till

the display shows delay time “       ”;

-

press the “Start/Pause” to start the 

program.

-

Press this touchpad to select the spin 

speed or no spin, if you want your 

laundry to be spun at a speed different 

from the one proposed by the washing 

machine.
The speed of spin level are:

 High

, about 800 rpm ;

 Mid

, about 650 rpm ;

 Low

, about 550 rpm.

 No Spin

, 0 rpm.

Spin Touchpad

This option allows you to soak heavily 

soiled clothes at the beginning of the 

wash. To do this, press the Soak touchpad 

to select the soak time.

Soak Touchpad

The lid must be closed to allow Soak 

functions to operate. The machine will 

agitate for short periods. At other times, 

the clothes are soaking and the machine 

will be doing nothing.

Note:

Compare this with Regular rinse 

where much more water is used.
Regular rinse, water enters the 

machine filling up to the wash water 

level selected. The washer agitates 

and finally empties the rinse water 

through the drain hose. 
Extra rinse, this is a special option for 

those people who suffer from 

allergies, this extra rinse will provide 

2 rinses to ensure all detergent 

residue has been removed.
Select Regular rinse if you are going 

to use fabric softener. 
Regular rinse ensures the fabric 

softener is correctly dispensed and 

thoroughly removed from your 

clothes during rinsing.

Summary of Contents for WWT1084C7WA













































Reviews: