Westinghouse WWT6084J5WA, User Manual

16

        www.westinghouse.com.au / www.westinghouse.co.nz

This setting permits you to either enable

or disable the buzzer at the end of the 

program. As an example, you might wish 

to disable this buzzer when you start a 

wash when going to bed, so that when 

the wash finishes approximately 1 hour 

later, it will not disturb you through the 

night.

Error warning beeps such as critical 

faults are not disabled.

Enabling/Disabling End-Of-Wash 

Buzzer

To disable the buzzer sound, press 

“Water Level” and “Temp” buttons at 

the same time about 3 seconds, the 

icon “          ” will show on display 

along with buzzer sound.

To return to default configuration press 

these two buttons at the same time 

about 3 seconds, the icon “          ” will 

show on display along with buzzer 

sound.

●

●

–

–

Child Safety Lock (     ) Option

Your appliance is provided with CHILD 

SAFETY LOCK which permits you to leave 

the appliance unsupervised with the door 

closed without having to worry that children 

might be injured by or cause damage to 

the appliance.

Soak (     ) Option

Set this option AFTER pressing the 

Start/Pause button.

To activate the function, press and 

hold “Rinse” and “Spin” button about 3 

seconds until the display shows the 

icon “           ”.

To set “Child Lock” option:

To deactivate the function, press and 

hold these two buttons again until the 

display shows the icon “          ”.

You must deactivate the function 

before operating the washing 

machine.

All the buttons are locked.

●

●

If you press any button while 

Child Lock is activated, the icon 

“           ” will flash on display 

3 times  along with buzzer sound.

This option allows you to soak heavily 

soiled clothes at the beginning of the 

wash. To do this, press the “Temp” and 

“Rinse” buttons at the same time for about 

3 seconds to add the soak phase.
The lid must be closed to allow Soak 

functions to operate. The machine will 

agitate for short periods. At other times, 

the clothes are soaking and the machine 

will be doing nothing.

3.5 Settings

When loading the clothes into your 

washing machine, there are four things to 

remember:

Clothes must be loaded evenly 

around the agitator. For best results 

load small items first, followed by 

large items. 

1.

1.

Clothes must not be wrapped around 

the agitator.

2.

The washing machine must not be 

overloaded. Clothes must be able to 

move during wash.

3.

The load should contain only three or 

four large items, for example sheets. 

The rest of the load should be small 

items. A mixed load of  large and 

small items will wash cleaner than a 

load of all large items.

4.

Powder / Liquid Detergent / 

Bleach

Connect the mains plug to the mains 

socket.

1. Pull the dispenser drawer forward out 

from its position.

Liquid Detergent (option)

1. Measure the correct amount of liquid 

detergent by following the 

recommendations on the package.

Pouring onto the clothes. 

2. Measure the correct amount of powder 

or liquid detergent by following the 

recommendations on the package.

3. Pour it into the detergent dispenser 

drawer.

4. Put the dispenser back into its recess.

2. Turn the water tap on.

move around 

agitator