Westinghouse WWT6084J5WA, User Manual

19

1. Press Power (      ) 

EXWWRQ

, turn the 

program selector to the required 

program.

The relevant light will light up. 

-

Your washing machine is now in 

STAND-BY-MODE and ready to 

wash your clothes. 

-

The buzzer will sound.

-

Once you select a program, the 

program selected will stay at that 

position for the whole of the cycle.  

-

The selector dial can be turned 

either clockwise or anticlockwise.

-

The display shows the program 

duration.

-

2. If you want your laundry to be 

washed with functions different from 

the one proposed by the machine, 

press Water Level, Soak, Rinse and 

Spin option buttons.

If the settings shown on the control 

panel are what you want to use, 

press the Start/Pause touchpad to 

start your wash. 

NOTE: 

To start a program, press the Start/Pause  

(       ) button, a default program duration 

will be displayed on the screen.

3. If you want to define the end of the 

washing program, press the “Delay 

End” button repeatedly to choose 

your machine end time.

Different functions can be combined 

which is dependent on the program 

selected. When these buttons are 

pressed, the corresponding pilot 

lights come on. 

When you select the Rinse & Spin 

program, there will be a delay of at least 

2 minutes before the washing machine 

starts to spin. 

This delay is a drain out period to ensure 

the bowl is empty of water, which is 

necessary before spin commences. Even 

though you may have only put wet clothes 

into an empty bowl, the delay before spin 

will still occur to be safe and to protect 

your washing machine.    

NOTE

Press the Start/Pause again. The 

program will continue.

It is possible to change only some 

options after the program has started.

Press the Start/Pause button to enter 

PAUSE mode.

1.

Change the options.

2.

Press Start/Pause button again. The 

program will continue.

3.

If you have started your wash and you 

wish to stop it for some reason, press the 

Start/Pause button to enter PAUSE mode. 

The time remaining is shown then 

“       ”.

You can turn the Program Selector Knob 

to a new program position at any time. If 

you do move the Program Selector Knob 

the effect will be different depending on 

the status of the machine at the time you 

do this, as follows:    

When the machine is in PAUSE mode, 

moving the Knob to a new position will 

result in the machine resetting to the 

start of the new program.
When the machine is running, moving 

the Knob to a new position will result in 

the machine continuing the wash and 

the display will show “        ” and 

flashing with 3 consecutive short beeps 

to remind you that this option is not 

allowed.

4.6 Setting a Program

4.8 Interruption Of A Program

4.9 Changing A Program

4.10 Changing The Options

4.7 Starting a Program