5/12/2017
TECH-538/D.W.O. 23160
Page 142 of 189
Index
Parameter mnemonic
Description / EDD Help
Valid Range
FF Default
FCT Default
Deep Default
Units
Write
Mode
Other
R/W
49
FD_MAINT_MAP
This parameter enables or
disables conditions to be
detected as active for this
alarm category. Thus the
same condition may be
active in all, some, or none
of the 3 alarm categories.
50
FD_CHECK_MAP
This parameter enables or
disables conditions to be
detected as active for this
alarm category.
51
FD_FAIL_MASK
This parameter allows the
user to suppress any single
or multiple conditions that
are active, in this category,
from being broadcast to the
host through the alarm
parameter.
52
FD_OFFSPEC_MASK
This parameter allows the
user to suppress any single
or multiple conditions that
are active, in this category,
from being broadcast to the
host through the alarm
parameter.
53
FD_MAINT_MASK
This parameter allows the
user to suppress any single
or multiple conditions that
are active, in this category,
from being broadcast to the
host through the alarm
parameter.
54
FD_CHECK_MASK
This parameter allows the
user to suppress any single
or multiple conditions that
are active, in this category,
from being broadcast to the
host through the alarm
parameter.
55
FD_FAIL_ALM
This parameter is used
primarily to broadcast a
change in the associated
active conditions, which are
not masked, for this alarm
category to a Host System.
