5/12/2017
TECH-538/D.W.O. 23160
Page 30 of 189
Cover and Cover Lock Operation (ICoT 6000 only)
To maintain the approval compliance, screw both covers down manually to create a water tight seal.
Both of the enclosures are required to be locked by the means of an Allen Head Cap Screw which secures
to the underside of the cover when turned in the CCW direction preventing the covers from unintentional
opening. See figure below for reference.
1.
For large cover use a 5/32 (.155”) or 4mm A/F Allen key and for the small cover use a
9/64 (.141”) Allen key. Turning in a CCW direction to engage the screw.
2.
Tighten to 12 in-lbs. (1.35 N-m).
3.
To disengage turn screw in a CW direction to release
Figure 3-14 - Cover Lock
