5/12/2017
TECH-538/D.W.O. 23160
Page 101 of 189
8.
Using the Signal Generator (
SGGN
) and Comparator (
CMP
) function blocks from the DeltaV library, as well
as the Analog Input (
FFAI
) and Analog Output (
FFAO
) function blocks from the ICoT, build a control
application
Figure 8-60 – Application Example with Signal Generator Function Block on DeltaV System
9.
When one of the function blocks is selected, the parameters field (inferior left part of the Control Studio
tool) shows the parameters related to the selected function block. Double clicking one of the parameters, a
window with information of the selected parameter is opened and its value can be changed
Figure 8-61 – Application Example with Signal Generator on DeltaV System
