Weston SPORTSMAN'S ADVANTAGE 65-0501-RT, Service Instructions Manual

-3-

Some parts of the 

Vacuum Sealer

  may need 

replacing after repeated use.  A 

Maintenance 

Kit 

(Sold Separately) 

(Figure 1) may be 

necessary  for the 

Vacuum Sealer

 to properly 

function.  

NOTE:

  Remove the inner foam oval 

from all of the foam 

Chamber Seals

.  The foam 

oval can be discarded, only the outer foam ring 

is needed (Figure 1a). 

REPLACING THE VACUUM

CHAMBER SEAL:

1.  Press the 

ON/OFF Button

 on the 

Control 

Panel 

to turn the 

Vacuum Sealer 

 “OFF”.  

2. Disconnect the 

Vacuum Sealer

 from the 

power supply.

3.  Make sure the 

Vacuum Sealer

 is completely cool. 

4. Press both of the 

Lid 

Release Buttons

 on each side 

of the 

Vacuum Sealer 

to release 

the lid lock, then lift the

 Vacuum 

Lid 

to open. 

5. Remove  the 

Vacuum 

Chamber Seal 

(NOTE: The 

Vacuum Chamber Seal 

DOES 

NOT have an adhesive backing.)  

(Figure 2) from the groove 

around the 

Vacuum Chamber

on the base of the 

Vacuum 

Sealer

.

6. Position a new 

Vacuum 

Chamber Seal

 into the groove 

around the 

Vacuum Chamber

on the base of the 

Vacuum 

Sealer

.

7.  Work the 

Vacuum Chamber 

Seal

 into the groove until the 

seal is completely in place. 

SERVICE INSTRUCTIONS

Figure 1

Figure 2

WARNING!

  Before cleaning, assembling or disassembling the 

appliance, make sure the appliance is OFF and the PLUG IS REMOVED 

FROM THE OUTLET/POWER SOURCE!

Seal Bar

Heating 

Element/

Seal Bar Tape

Vacuum 

Chamber 

Seal

Vacuum 

Chamber

Figure 1a

Discard

foam 

ovals

Keep 

Chamber 

Seals

Vacuum Sealer 

Maintenance Kit