Westweld LTD
Office:
No.51, Xuefu Avenue, Nanan, Chongqing 400074 , China
3
Laser warning label
Fiber do not fold label
D.Electrical safety
1
Please connect the PE wire to ground, and ensure the connection is firm and reliable.
The grounding break meeting causes the electrification of the product
shell, which may cause personal injury to the operator.
2
Ensure that the AC power supply is normal.
Wrong input power or power voltage will cause unrecoverable damage to
the laser source or controller.
1. The preface
Thank you for choosing WestWeld MS-1000/1500/2000/3000HLW handheld laser welding machine
products, This manual provides you with important safety, operation, maintenance and other
matters needing attention. Before using this machine, please carefully read this user manual and
keep it properly. Please observe the following precautions and warnings to ensure operational
safety and optimal condition of the machine.
This user manual is not a quality guarantee. Correction of printed errors, modifications to the
information, and improvements to the product shall be explained by WestWeld at any time without
prior notice. The corrections will be included in the reissued user manual.
2. Product Introduction
Laser welding is the process of using the laser beam as a heat source to heat the work-piece to be
welded to form a welding joint to achieve welding as shown in Figure 2.1.
Laser welding has the following advantages:
(1) Heat input is small, small heat impact area, weld depth and width ratio is large.
(2) Cooling speed is fast, the weld organization is fine, and the joint performance is good.
(3) Fast welding speed, small welding deformation, high reliability, high adaptability, good
accuracy, high efficiency, easy to achieve automation.
