Westweld LTD
Office:
No.51, Xuefu Avenue, Nanan, Chongqing 400074 , China
8
(4) Welding parameters table
Default parameters: Scanning speed:300mm, Duty cycle:100%, Frequency:1000Hz
The protective gas pressure is set between 0.3MPa-0.5MPa by adjusting the pressure regulator.
3. Installation and use handheld laser welding machine
Check whether the appearance of the equipment is abnormal, and whether the output cable is
bent and damaged;
Please ensure that the power plug contacts well;
Check and ensure the dust-free pollution inside and outside of the welding protection lens;
Check and ensure the normal status of all buttons and switches on the whole machine;
3.1 Installation of wire feeder
A.
Installation of welding wire roll
1. Weld wire is ordinary welding wire, common 5KG-30KG can be installed, but do not use medicine
core welding wire.
2. Adjust the strength of the roller through the inner hexagon, so that it is not too tight or too loose,
and send the silk without a jam (usually do not need to adjust)
3. Cover the cap after adjustment (Figure 1)
6
60
4
2000
ER 1.6
80%
7
50
3.5
2600
ER 1.6
100%
8
45
3.5
3000
ER 1.6
100%
Aluminum
1
80
2.5
450
AL 1.0
90%
Nitrogen
2
70
3.0
900
AL 1.2
100%
3
65
3.0
1500
AL 1.2
100%
4
60
3.5
1800
AL 1.2
100%
5
60
3.5
2200
AL 1.6
100%
6
55
3.5
2800
AL 1.6
80%
