background image

- READ ALL INSTRUCTIONS 

BEFORE

 ASSEMBLING CRIB. 

KEEP INSTRUCTIONS FOR 

  FUTURE USE.

- TO REDUCE THE RISK OF SUDDEN INFANT DEATH SYNDROME (SIDS), PEDIATRICIANS

  RECOMMEND HEALTHY INFANTS BE PLACED ON THEIR BACK TO SLEEP, UNLESS

  OTHERWISE ADVISED BY YOUR PHYSICIAN.

- PREVENT BURNS. KEEP CRIB AWAY FROM OPEN FIRES AND OTHER HEAT SOURCES.

- ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 IN. (69 CM). BY 51-5/8 IN.

  (131 CM), WITH A THICKNESS NOT EXCEEDING 6 IN. (15 CM). THE DIMENSIONS OF THE 

  MATTRESS SHOULD BE TAKEN FROM SEAM TO SEAM.

DO NOT 

USE A WATER MATTRESS WITH THIS CRIB.

- NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS A MATTRESS COVER

  BECAUSE THE CAUSE SUFFOCATION.

- IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN'S PRODUCTS.

- FOLLOW WARNINGS ON ALL PRODUCTS IN CRIB.

 

SUFFOCATION HAZARD:

- INFANTS CAN SUFFOCATE IN GAPS BETWEEN A MATTRESS THAT IS TOO SMALL OR TOO

  THICK AND CRIB SIDES.

- INFANTS CAN SUFFOCATE ON SOFT BEDDING. NEVER ADD A PILLOW OR COMFORTER.

  NEVER PLACE ADDITIONAL PADDING UNDER AN INFANT.

 

STRANGULATION HAZARD:

- STRINGS CAN CAUSE STRANGULATION! DO NOT PLACE ITEMS WITH A STRING AROUND

  CHILD'S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS. 

DO NOT 

SUSPEND

  STRINGS OVER A CRIB OR ATTACH STRINGS TO TOYS.

- TO PREVENT STRANGULATION, TIGHTEN ALL SCREWS AND BOLTS. A CHILD CAN TRAP

  PARTS OF THE BODY OR CLOTHING ON LOOSE SCREWS AND BOLTS.

DO NOT

 PLACE CRIB NEAR A WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY

  STRANGLE A CHILD.

 

FALL HAZARD:

- WHEN CHILD IS ABLE TO PULL TO A STANDING POSITION, SET MATTRESS TO LOWEST

  POSITION AD REMOVE BUMPER PADS, LARGE TOYS AND OTHER OBJECTS THAT

  COULD SERVE AS STEPS FOR CLIMBING OUT.

- WHEN CHILD IS ABLE TO CLIMB OUT OR REACHES THE HEIGHT OF 35 IN. (89 CM), THE

  CRIB SHALL NO LONGER BE USED.

 

IMPORTANT:

- CHECK THIS CRIB FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS OR

  SHARP EDGES BEFORE AND AFTER ASSEMBLY AND FREQUENTLY DURING USE. 

DO NOT

  USE CRIB IF ANY PARTS ARE MISSING OR BROKEN. ASK YOUR DEALER OR CONTACT

  WESTWOOD DESIGN: 635 N. BILLY MITCHELL RD., STE. B, SALT LAKE CITY, UTAH 84116,

  PHONE: 1-908-719-4707, EMAIL: SUPPORT@WESTWOODBABY.COM; FOR REPLACEMENT

  PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED. 

DO NOT

 SUBSTITUTE PARTS.

FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY INSTRUCTIONS COULD RESULT 

IN SERIOUS INJURY OR DEATH. 

WARNING

Summary of Contents for HAYDEN










Reviews: