The Wet Sounds subwoofers are a line of advanced low frequency transducers. These subwoofers use advanced materials
throughout such as our exclusive rubber spider, composite cones and thermoformed rubber surrounds. Wet Sounds has developed an
exclusive rubber spider for our subwoofers which is used for the spider as most marine speakers use cloth that will deteriorate over time.
These subwoofers are built to last in the harshest environments. The XS subwoofers utilize a cast aluminum frame that is powder coated to
provide a solid non flexing mount. Advanced acoustical technologies like perimeter venting, high temperature voice coils also help to make
these the most advanced marine subwoofers on the market.
WIRING
WET SOUNDS
XS-XXX V2
Marine subwoofer
is offered in Dual Voice Coil configuration 2+2 ohms. Voice coils can be wired in
parallel (Z = 1 ohm) or in series (Z = 4 ohms), allowing the user to properly match the driver to the amplifier.
parallel Z= 1 ohm
parallel Z= 4 ohms
DIMENSIONS (”)mm
6.49”(165mm)
9.37”(238mm)
4.72”
(120mm)
36mm
1.42”
o
o
10.07” (256mm)
0.21”
(5.5mm)
11.02” (280mm)
o
o
o
XS-10FA S4
SS-10B S4
0.21” (5.5mm)
9.68” (246mm)
10.12” (257mm)
o
o
o
6.30”(
160mm)
9.21”(
234mm)
5.27”
(134mm)
6mm
0.24”
o
o
XS-12 S4
4.92”
(125mm)
1
1.22”(
285mm)
7.36”(
187mm)
20mm
0.78”
o
o
0.27” (7mm)
12.6” (320mm)
11.8” (300mm)
o
o
o
XS-XXX V2
12.20” (310mm)
O
12.68" (322mm)
O
O
0.25” (6,5mm)
(8x)
(166mm)
6.53"
0.98"
(25mm)
0.48"
(12mm)
O
O
8.35"(212mm)
1
1.14"(283mm)
SW-10FA S4
10.07” (256mm)
11.02” (280mm)
o
o
