- FRAME LINEA CABINET INSTALL GUIDE -
(2018-05-07)
11/14
9.
Fasten down the cabinet to the wall by adding security tie-down, 3" long #10
wood screw at wall post. Do not over tighten as this may damage the backing
(within console).
10.
Secure electrical wire with cable connector.
11.
Bond the entire electrical system at the indicated location with supplied
hardware. (depicted at step 11)
12.
Make connections with WAGO terminal blocks (insert positive and negative
leads to respectful terminal blocks as per electrical diagram with white to white,
black to black)
13.
Carefully replace console, making sure not to crimp or pinch wires and
connections.
WAGO
terminal
