17
Using
Setting up Temperature Unit
In time display mode press the down key DOWN (18) to switch between
displaying temperatures either in ºC or in ºF unit.
Setting up Alarm
Individually you can setup 2 separate alarm times (Alarm 1 + 2).
In time display mode press the mode key MODE (17). The alarm time 1 (
A1
)
appears on the upper right corner of the display.
Press and hold the mode key for 3 seconds. The hour digit of the alarm time
blinks.
Use the down key DOWN (18) and the up key UP (19) to setup the hours.
Press the mode key. The minute digit blinks now.
Use the down key DOWN (18) and the up key UP (19) to setup the minutes.
Press the mode key for confirmation and to return to the time display mode.
Press the alarm key ALM. (16) once to activate alarm 1.
A small bell icon on top of the second digit indicates an enabled alarm.
The alarm signal sounds at the setup alarm time:
0-10 seconds: one beep per second
10-20 seconds: 2 beeps per second
After 20 seconds: 4 beeps per second
Press any key when the alarm sounds to turn off the alarm.
Press the snooze key SNOOZE (14) to turn off the alarm temporary. The bell
icon blinks and the alarm is activated again after 5 minutes.
In time display mode press the mode key MODE (17) twice. The alarm time 2
(
A2
) appears on the upper right corner of the display. Now proceed in the same
way as described for the alarm 1 to setup the alarm time 2.
In time display mode press the alarm key ALM. (16) to activate or deactivate
the corresponding alarm:
Alarm 1 on -> Alarm 2 on -> Alarm 1 + 2 on -> Alarm 1 + 2 off